Dremel Diamond Wheel Point 7103

Technical Specifications

Shank diameter: 3.2 mm
Working diameter: 2.0 mm
Maximum RPM: 25,000 1/min

Packaging Contents

• Quantity: 2

Description

Dremel Diamond Wheel Point 7103

Dremel Accessories – Dremel Diamond Wheel Point 7103

The Dremel Diamond Wheel Point 7103 is for fine detail work, cutting, engraving, carving, touch-up and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles.

It removes material quickly and easily. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones and other hard materials. Bits are covered with diamond particles. Removes material quickly and easily. 1/8″ shank or 3.2mm.

To perform best results of Dremel Diamond Wheel Point 7103, Dremel recommend users:

• Insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit.
• Secure objects to a stable surface while working.
• Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.
• Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).
• If chattering occurs, increase speed.

Not quite suitable? What about a bigger size 4.4 mm Dremel Diamond Wheel Point 7015?

Additional information

Weight 0.2 kg